High-strength Steel Plate 3-in-1 Servo Feeder & Zig‑Zag Feeder
Custom integrated automation equipment for high-strength / thick steel plate stamping, widely used for auto structural parts, engineering machinery and heavy-duty hardware.
Combines decoiling, leveling and servo feeding in one unit, replacing separated equipment layout with small footprint & simple operation. High-precision servo control solves high-hardness plate problems: difficult leveling and feeding deviation, avoiding plate deformation & dimension errors.
Enables continuous unattended feeding-stamping. Less manual work, higher consistency and lower material loss. Energy-saving, labor-saving intelligent upgrade for thick-plate stamping.
| L Series | H Series | T Series | ||||||||
| Sheet width (mm) | 600 | 800 | 1000 | 1000 | 1300 | 1400 | 1600 | 1800 | 1600 | 1800 |
| Sheet thickness (mm) | 0.5 – 4.5 | 0.6 – 6.0 | 0.5 – 3.5 | |||||||
| Coil weight (T) | 5 | 8 | 8 | 8 | 12 | 12 | 15 | 15 | 15 | 15 |
| Coil outer dia.(mm) | 1600 | 1600 | 1600 | |||||||
| Coil inner dia. (mm) | 508 | 508 | 508/610 | 508/610 | ||||||
| Max linear speed(m/min) | 23 | 23 | 23 | |||||||
| Leveling roll | Φ65，Top 5,Bottom 5 | Φ85，Top 5,Bottom 5 | Φ74，Top 7,Bottom 7 | |||||||
| Feed roll | Top 1,Bottom 1 | Top 1,Bottom 1 | Top 1,Bottom 1 | |||||||
| Main servo motor(kw) | 4.4 | 7.5 | 11 | 11 | ||||||
| Coil reel expansion mode | Hydraulic link type | Hydraulic link type | Hydraulic wedge-block type | Hydraulic wedge-block type | ||||||
| Reel motor (kw) | 3.7 | 5.5 | 5.5 | 7.5 | 11 | 11 | ||||
| Working power supply voltage(V) | AC380/50HZ | AC380/50HZ | AC380/50HZ | AC380/50HZ | ||||||
| Working air pressure(Mpa) | 0.6 | 0.6 | 0.6 | 0.6 | ||||||
| Servo Zig‑Zag Feeder | |||
| Sheet width (mm) | 500 | 700 | 1300 |
| Sheet thickness (mm) | 0.5 – 3.0 | ||
| Coil weight (T) | 5 | 12 | |
| Coil outer dia. (mm) | 1400 | 1600 | |
| Coil inner dia. (mm) | 508 | ||
| Max linear speed(m/min) | 23 | ||
| Leveling roll | Φ55，Top3,Bottom4 | Φ85，Top3,Bottom4 | |
| Feed roll | Top1,Bottom1 | ||
| Main servo motor(kW) | 3 | 4.4 | |
| Swing servo motor (kW) | 2 | 15 | |
| Swing driver | Helical gear/Helical rack | ||
| Swing travel | W Type，Z Type | ||
| Round blank dia.(mm) | 200 | 200 | 400 |
| Max stroke（SPM） | 40 | 40 | 40 |
| Uncoiling mode | Gravity uncoiling | Tension uncoiling | |
| Reel motor(kW) | 3.7 | 7.5 | |
| Working power supply voltage(V) | AC380/50HZ | ||
| Working air pressure(Mpa) | 0.6 | ||
中文
